MUZZLE ADAPTERS - RIFLE

Multi-use Muzzle Adapter

image227

Keep your favorite muzzle device.


Use your existing muzzle device

image228

  • Standard AR-15 / .22cal.              1/2 x 28 
  • Standard .308 - 7.62 x 51             5/8 x 24 
  • Standard AK47 - 7.62x39           14M-1 LH
  • All have the same external threads:                     1"-14 SAE & 3/4 NPT  

Percussion Shroud

image229

Reduce the muzzle blast to your neighbors!

Shroud channels the muzzle blast forward, away from the shooter and the people to either side.    Mounts directly to the Adapter Thread.


Golf Ball Launcher!

image230

Just screw on the second Shroud and you can launch golf balls over 100 yards!

REMEMBER- You must use  BLANKS!

Keep your work area clean!

image231

When you are done shooting, simply attach the compatible solvent trap oil filter and clean the barrel from the breach to the muzzle.  The oils, solvents, carbon, metal particles, etc. are all pushed into and trapped in the solvent trap filter.

Use these standard solvent trap filters

THREAD  1"-14 SAE 

  •              WIX 33528 & WIX 33674

THREAD  3/4 NPT

  •             WIX 24003 & NAPA 4003

THREAD 13/16-16

  •             FRAM-5 &STP-5

THREAD 3/4-16

  •             ST3600

Ruger 10/22 Slip-On Adapter

image232

Most Ruger 10/22s have a CROWNED muzzle. The Slip-on Adapter provides a 1/2-28 thread to mount a wide variety of Flash Hiders, Muzzle Brakes and other accessories.

Ruger 10/22 Slip-On Triple Thread Adapter

image233

The Triple Thread Adapter allows the user to directly mount a Solvent Trap for cleaning the gun.  Threads are 3/4-16, 13/16-16, 3/4 NPT.

Ruger Slip-on for Bull Barrels

image234

Lock this Adapter in place to clean your Ruger 10/22 Bull Barrel.  Threads are 3/4-16, 13/16-16, 3/4 NPT.

Triple Thread Barrel Mount

image235

The Triple Thread Adapter allows the user to directly mount a Solvent Trap for cleaning the gun.  Threads are 3/4-16, 13/16-16, 3/4 NPT.   

Available in most standard muzzle threads.  Including: 1/2-28, 5/8-24, 1/2-36, 13.5-1mm,         15-1mm, 16-1mm

Universal Mounting Ring for Maglite Solvent Traps/Percussion Shrouds

image236

An Adapter Ring with a 3/4 NPT female thread and an external thread matching the D-cell Maglite.    Now you can attach your Maglite Solvent Trap /Percussion Shroud to ANY of your firearms by selecting the matching  Triple Thread Adapter.

Universal Mounting Ring and End Cap for Maglite Solvent Traps

image237

End Cap will fit standard D-cell Maglites